- Large scale and mature production product, high quality
- RGB full color in each dot, interface use standard HUB75
- Power supply 5V, up to 2A (9W average, max <16W) maybe used to full power all LEDs, 3.96mm 1×4 jack.
- Can be used on outdoor (P6-P10) water proof or use indoor
- P6-32×16: means dot matrix pitch is 6mm, each panel is 32 x16 =512 dots.
More Specification:
- Life time 1000,000,000 hours.
- Drive constant current, dynamic
- Flash rate 2000Hz
- size 256×128 mm
Package:
- Include 16P ribbon cable for HUB75 connector to drive board.
- 2-to-2, 4pin 3.96mm to “Y” connector power cable.
- NOT include the water proof rubber seal ring, installation screws, notice this to be bought alone.
Documentation.
- Demo code supported for Raspberry Pi, code revised from here, compatible and mostly same except transfomer part, original code can not well support our this type.
- Demo video available here.
- Raspbeery Pi adapter board is available here.
The post RGB Full Color LED Matrix Panel appeared first on ElectroDragon.